Resources
Guides and reference for setting up your accounts, sending well and connecting your own systems.
Getting started
About 15 minutes from sign-up to your first campaign.
1. Create your account and subscribe
Create an account with your email address. On the subscription page, choose a payment method and duration, send the payment to the wallet shown, and upload your receipt. Your account becomes active as soon as the payment is approved.
2. Prepare your sending accounts
You can send through any email provider. Services with a built-in API connection (Amazon SES, SendGrid, Mailgun, Postmark, Brevo, Resend, Bird and turboSMTP) only need an API key. Any other service with a send API connects as Other email service API: type its name and the settings are filled in for MailerSend, SparkPost, Mailjet, SMTP2GO, Zoho ZeptoMail, Elastic Email, Mailtrap, Mandrill, Netcore and Plunk. Any mailbox, such as an email account on your cPanel hosting, connects with its SMTP details: outgoing server, port, username and password. Either way, verify the domain you'll send from with the provider. See the deliverability guide for the DNS records that matter.
3. Add your sending accounts
Open Setup → Sending accounts, choose the provider and enter its details. Add one account per brand, region or client, give each a clear label such as Europe desk, set its sending rate, and use Send test email to check it. Mark one account as your Default; lists set to Default always use it.
4. Add senders
Open Setup → Senders & settings and add each From name and address. Tie each sender to the sending account whose domain it belongs to, so it's only offered for that account, or choose Any sending account for an address every account may send from.
5. Build your template libraries
Open Content → Templates and create templates for each account. Use {{name}}, {{email}} and your own placeholders. Mark a template as shared only if every account may use it.
6. Import your lists
Open Audience → Email lists, create a list and paste addresses or upload a CSV or Excel file. Not sure a file is clean? Run it through Audience → Duplicate checker first and save the result straight to a list. You can also paste addresses directly into a campaign.
7. Send your campaign
Open Campaigns → Send a campaign. Set up the first list, add more lists with Add another list, then click Review & send. Check the summary and start sending. Follow progress and open rates on Campaigns → Campaign monitor.
Every screen has ? buttons next to fields that need explaining, and the dashboard shows a Getting started checklist until your first campaign is sent.
Guides
Getting more out of every send.
Share a list between several accounts
On the Send page, set a list's Sending account to Several accounts (rotate), tick the accounts and give each a share. With shares 2, 1 and 1, the first account sends half the emails and the others a quarter each. Use a sender set to Any sending account and a shared template, since every account must be able to send the same email. If an account is blocked or switched off, its waiting emails move to the others on their own.
Send in batches with Sending Pace
Turn on Sending Pace in a list and set, for example, 500 emails every 1 hour. The review tells you how many batches there will be and when the last one starts. Useful for hosting mailboxes with hourly limits, and for warming up a new domain. Open the campaign to change the pace, or switch to full speed, while it runs.
Repeat a send with Auto-Send
Turn on Auto-Send in a list and choose when the next send happens: a set time after the previous send has finished, or at a date and time you pick. Number of automatic sends is how many repeats follow the first send; leave it empty to keep repeating. Schedules are listed at the bottom of the Send page, where you can pause, resume, edit or switch them off.
Keep lists clean
Addresses that bounce, complain or are skipped as undeliverable are removed from your lists automatically; see them under Audience → Email lists → Bounced & suppressed addresses, where any can be put back. Before importing a new file, use the Duplicate checker to remove duplicates and download or save the cleaned list.
Read your open rates
Open rates appear on each campaign, on the Campaign monitor and on the dashboard. They count the emails whose images were loaded, so treat them as a trend rather than an exact figure: some mail apps load images automatically, and some block them until the reader allows it. Open tracking can be switched off under Setup → Senders & settings.
Deliverability guide
Practical steps to reach the inbox.
Authenticate every sending domain
- SPF and DKIM. Add the records your sending provider gives you for each domain, and wait for them to verify before sending.
- DMARC. Publish a DMARC record such as
v=DMARC1; p=none; rua=mailto:dmarc@yourdomain.com, then tighten the policy once reports look clean. - Match your From address. Send from an address on the domain you verified for that sending account. Tie senders to their account so the wrong pairing can't be chosen.
Send to people who expect your email
- Only send to contacts who agreed to hear from you or have an existing business relationship with you, as required in your markets.
- Include a clear way to unsubscribe or opt out in every marketing template, and honour requests promptly. Use Remove addresses on a list to take people off it.
- Never send to bought or scraped lists.
Keep lists healthy
- Keep Reputation Guard switched on (Audience → Reputation Guard). It skips addresses that would bounce at the moment of sending and adds hard bounces and complaints to your suppression list automatically.
- Use Clean with Reputation Guard on a saved list before a large campaign, and add unsubscribes from other systems to your suppression list.
- Review Unsent after each campaign. Remove addresses that bounce rather than retrying them repeatedly.
- Re-confirm contacts you haven't emailed for a long time before adding them back to regular campaigns.
- Combining lists removes duplicates automatically, so the same person isn't emailed twice in one campaign. Use the Duplicate checker to clean files before you import them.
- Leave Remove them from my email lists switched on in Reputation Guard, so bounced and undeliverable addresses leave your lists as soon as they are found.
Ramp up new domains gradually
For a new domain or account, start with your most engaged contacts and smaller volumes, then increase over a few weeks. Set a modest rate on new sending accounts, or use Sending Pace to send in small batches, and raise it as results stay good.
Write clear, honest emails
- Use a subject line that matches the content.
- Include a plain postal address and contact details in commercial emails.
- Keep a sensible balance of text and images, and test with a few internal recipients first.
API reference
Send single emails from your own systems.
Authentication
Generate a token under Setup → Senders & settings → HTTP API token. Send it in the Authorization header as Bearer YOUR_TOKEN, or in an X-API-Token header. Keep the token secret; regenerate it if it's ever exposed.
Send an email
POST https://oprasend.com/api.php with a JSON body:
{
"to": "buyer@example.com", // required
"name": "Jane Smith", // optional, fills {{name}}
"template": "Order received", // template name or ID; first template if omitted
"api_key": "Europe desk", // sending account label or ID; the template's own account if omitted
"sender": "sales@yourdomain.com", // sender email or ID; default sender if omitted
"subject": "Your order {{order}}", // optional subject override
"vars": { "order": "A-1042" } // optional values for your placeholders
}
The same rules as campaigns apply: a template or sender tied to one sending account is refused for any other account. Reputation Guard checks the address first; a suppressed address returns 422 with "status":"suppressed".
Responses
200 | Sent. Body: {"ok":true,"id":123,"status":"sent"} |
401 | Missing or wrong token. |
402 | The account's subscription has expired. |
404 | Template, sender or sending account not found. |
405 | Only POST is accepted. |
422 | Invalid address, or a template or sender that belongs to another sending account. |
502 | The sending provider refused the email. The body includes its error. |
Delivery webhooks
Sending accounts whose service reports deliveries back show a Delivery tracking (webhook) option on the Sending accounts page, with the exact webhook address for that account and step-by-step instructions, including which events to tick. Save the webhook's signing secret on the same account. Delivery tracking is optional and can be switched off per account; without it, emails show as accepted once the provider takes them.
Frequently asked questions
Can't find an answer? Contact us.
Which email services can I send through?
Any of them. Amazon SES, SendGrid, Mailgun, Postmark, Brevo, Resend, Bird and turboSMTP connect by API key. Other services with a send API (for example MailerSend, SparkPost, Mailjet, SMTP2GO, Zoho ZeptoMail or Elastic Email) connect as Other email service API, and any service or mailbox, including the email accounts on your own hosting, can also connect by SMTP. Each list in a campaign can use a different account, or your default account.
Can different lists in one campaign use different templates?
Yes. Every list chooses its own sending account, sender and template, and has its own subject and variables. Lists in the same campaign never share settings.
Why can't I see a template when sending?
Templates belong to a sending account. A list only shows templates of the account it sends through, plus shared ones; a list that rotates between several accounts only shows shared templates. Open the template and change Belongs to sending account, or make a copy for the other account.
Can one list be sent through several SMTP accounts?
Yes. Choose Several accounts (rotate) as the list's sending account and tick the accounts to use. The emails are shared out between them, and if one stops working its emails move to the others.
Can I limit how many emails go out per hour?
Yes. Turn on Sending Pace in the list, for example 500 emails every hour. Each sending account also has its own rate per second.
How accurate are open rates?
An open is counted when the email's images load. Some mail apps, such as Apple Mail, load images automatically, which counts as opened; others block images until the reader allows them, which isn't counted. Use open rates to compare campaigns rather than as an exact figure.
Are bounced addresses removed from my lists?
Yes, automatically, unless you switch this off in Reputation Guard. Each removal is listed on the Email lists page with the reason, and can be put back.
How do I find duplicates in a file?
Open Audience → Duplicate checker, paste the addresses or upload the CSV or Excel file, and click Check for duplicates. Remove them in one click, then download the cleaned list or save it to an email list.
What happens if someone is on two of my lists?
When you select several saved lists for one route, each address receives the email once.
Do I have to save a list to send a campaign?
No. Choose Paste emails directly and paste one address per line, optionally followed by a comma and a name. Invalid lines are shown and skipped.
What happens when my subscription ends?
Your account becomes inactive at the expiry time and running campaigns pause. You can still log in, renew from the subscription page, and resume your campaigns after the payment is approved.
Does uploading a receipt activate my account?
No. An administrator checks every payment first. Your account becomes active as soon as it's approved.
I forgot my password.
Use Forgot your password? on the log-in page. We'll email a link that works once and expires after one hour.
Can I export what I've sent?
Yes. Under Campaigns → Delivered & exports you can filter sent mail and download it as CSV or as .eml files.
Start sending with your own accounts
Create an account, choose a plan and connect your first sending account. Your account goes live as soon as your payment is approved.